Product ID:SOLID HIDE LATEX RUSTIC STAIN 31497
MSDS Date:05/21/1986
FSC:8010
NIIN:00N009312
MSDS Number: BCSCR

PRATT & LAMBERT INC

75 TONAWANDA ST
BUFFALO, NY 14240

Emergency Phone: 716-873-6000

Info Phone: 716-873-6000

Cage: 77359

PRATT & LAMBERT

BUFFALO, NY 14240 US

Telephone: 716-873-6000

Cage: 77359

FORMALDEHYDE (SARA III)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: <1%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')

CAS: 8012-95-1

RTECS: PY8030000

Fraction By Weight: <1%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3/10 STEL;9192

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <5%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

SILICA, CRYSTALLINE - CRISTOBALITE

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: 5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293

SODIUM ARSENATE (SARA III)

CAS: 7631-89-2

RTECS: CG1225000

Fraction By Weight: 15%

OSHA PEL SEE 1910.1018

ACGIH TLV: 0.2 MG AS/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SWALLOWING:MAY BE FATAL IF
SWALLOWED.INGEST:ETHYLENE GLYCOL MAY CAUSE ABD DISCOMFORT OR
PAIN,DIZZINESS,SEVERE KIDNEY DAMAGE AFTER INGEST OF ETHYLENE
GLYCOL.INHAL:IRRITATION RESPIRATORY SYSTEM,PULMONAR Y
EDEMA.EYE:IRRITATION.SKIN:DEFATTING &IRRITATION OF SKIN.
Explanation of Carcinogenicity:ACGIH:SUSPECTED HUMAN
CARCINOGEN.IARC:PROBABLE HUMAN CARCINOGEN(GROUP B):NTP: MAY
REASONABLY BE ATICIPATED(SUP DATA)
Effects of Overexposure:REPEATED EXPOSURE TO CRYSTALLINE SILICA MAY
CAUSE PNEUMOCONIOSIS.
Medical Cond Aggravated by Exposure:N/K

First Aid:INGEST:INDUCE VOMITING.IMMEDIATELY GIVE 2 GLASSES OF H*2O &
STICK FINGER DOWN THROAT:CONSULT PHYSICIAN OR POISON CONTROL CTR
IMMEDIATELY.INHAL:REMOVE TO FRESH AIR.EYE:FLUSH WITH H*2O UNTIL
RELIEVED.CO NSULT A PHYS.SKIN:WASH AFFECTED AREA WITH H*2O &
SOAP,REMOVE CONTM CLOTHING GET MEDICAL ATTENTION IF IRRITATION
PERSISTS.

Flash Point Method:SCC
Flash Point:>200F-793.33C
Extinguishing Media:USE NFPA CLASS B FIRE EXTINGUISHERS.CARBON DIOXIDE
DRY CHEMICAL OR ALCOHOL.POLYMER FOAM FOR LG FIRES.
Fire Fighting Procedures:WEAR SCBA,H*2O MAY BE INEFFECTIVE.BUT USE TO
COOL EXPOSED CONTAINERS.IF H*2O IS USED FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:DURING EMER CONDTN OVEREXPOSURE TO
DECOMPOSITION PRODUCTS MAY CAUSE HEALTH HAZARD.SYMPTOMS MAY NOT BE
IMMED APPARENT OBTAIN MED ATTENTION.

Spill Release Procedures:CONFINE IN SMALL AREA; USE ABSORBENT TO CLEAN
UP PLACE IN CONTAINER FOR DISPOSAL.
Neutralizing Agent:N/K

Handling and Storage Precautions:PROTECT FROM FREEZING OR EXTREMELY
HIGH TEMPERATURES.
Other Precautions:DO NOT TAKE INTERNALLY.CLOSED CONTAINER AFTER EACH
USE.KEEP AWAY FROM CHILDREN. DO NOT BREATHE SANDING DUST.

Respiratory Protection:NOT LIKELY TO BE NEEDED(MFR), NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:USE GENERAL DILUTION & LOCAL EXHAUST.FUMES EMITTED WHEN
BAKING.THIS PRODUCT MUST BE VENTED.
Protective Gloves:NOT LIKELY TO BE NEEDED (MFR).
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:NOT LIKELY TO BE NEEDED.
Work Hygienic Practices:OBSERVE GOOD WORK HYGIENIC PRACTICES .
Supplemental Safety and Health
OSHA PEL:MIN 8HRS. ACGIH TLV:TOTAL DUST 5MG/CUM RESPIRABLE DUST.
BP:83.33-221.11 C. EXPL OF CARCINOGENITY:TO BE CARCINOGEN.

Boiling Pt:B.P. Text:182-430 F
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:
Vapor Pres:
Vapor Density:>AIR
Spec Gravity:
pH:
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K
Appearance and Odor:N/K
Percent Volatiles by Volume:69
Corrosion Rate:

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT & SOURCES OF
IGNITION.
Hazardous Decomposition Products:BURNING,INCLUDING WHEN HEATED BY
WELDING OR CUTTING WILL PRODUCE SMOKE CARBON MONOXIDE & CARBON
DIOXIDE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS & FLAME.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.